12x10W RGBW compact dimming led outdoor par light

Specification

SOURCE

IP Rated 12x12W RGBWA 5-in-1 LEDs or 12x15W RGBWA-UV 6-in-1 LEDs

60,000 Hours LED Lifetime (May vary depending on different factors)

FUNCTION

IP65 Outdoor Rated 

25° Beam angles (optional 15°, 45°)

Excellent Color Mixing, over 16million kinds of color mixing effects

Flicker Free Operation for TV and FILM

Electronic Strobe and Variable Dimming Curves

Built-in Marcos effect, Built-in automated programs

Manual adjustment

CONTROL & CONNECTIONS

(2) DMX Channel Modes (5/9 channels)

LCD Menu Display

IP Rated 3pin DMX In/Out

IP Rated Power In/Out

DMX512, Auto run, Sound, Master/Slave

THERMAL & ELECTRICAL 

200W max Power Consumption

Input voltage: 100-240V AC/50-60 Hz

APPROVALS / RATINGS

CE | RoHs Compliant | IP65

SIZE / WEIGHT

11" (280mm) Length

11" (240mm) Width

11.8" (300mm) Height

22 lbs (10 kg) Weight

OPERATION ATTENTION                                                  

· Do not connect power cable of other electric products with this unit;

· Do not connect DMX512 Signal cable of other electric products with this unit;

· Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture;

· Always ground (earth) the fixture electrically;

· During long periods of non-use, disconnect the unit’s main power;

· Do not attempt to operate this unit if the power cord has been frayed or broken;

· There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself; 

· Maximum ambient temperature (Ta) is 35°C. Do not operate fixture at temperatures higher than this;

· The surface temperature of the light can reach to 65° C, cool down at least before you operate the light;

· The minimum distance between light-output and the illuminated surface must be more than 1 meters. Keep all combustible materials (for example fabric, wood, paper) at least 0.5 meters away from the fixture;

· Avoid looking directly into the light source (especially those who suffer from epileptic fits);

· Always mount this unit in safe and stable matter;

· When suspending the fixture above ground level, verify that the structure can hold at least 10 times the weight of all installed devices;

· Verify that all external covers and rigging hardware are securely fastened and use an approved means of secondary attachment such as a safety cable; 

· Block access below the work area whenever installing or removing the fixture.

· Avoiding hit the Light when you are move or install the light;

· If the exterior cord of the fixture is damaged, it must be replaced by manufactory, agent or a qualified technician.

1. Signal Connection

This light provide 3 pins cannon seats, Pin1 for signal ground, Pin2 for signal-, Pin3 for signal+. 

The controller, light and light will be connected by 3 pins signal cables one by one.

You can connect the output of the controller with input of the first light, and connect the output of the first light with the input of the second light in the DMX control mode, and so on one by one. And please connect the output of the last light with the terminal seat. You can don’t need the controller and circuit terminal seat in the master/slave controller mode. 

You can use one 120Ω& 0.25W resistance to insert into and weld the pin2 & pin3 of one male cannon plug to make the circuit terminal seat. The circuit terminal seat can avoid DMX-512 signal reflex and interference effectively.

If the output of your controller is using 5 pins cannon seat, please use 5pins into 3pins signal change cable.